We can offer our rod and bar products in the following dimensions. Please note that special properties/limitations specific to the material may apply. If your preferred dimensions are not listed, please get in touch. We will check for technical feasibility or arrange for alternatives.
Diameter: 6-800 mm
Length 1,500 - 12,000 mm
Delivery condition: forged, rolled, drawn, heat-treated, oxidised, de-scaled or pickled, twisted, peeled, ground or polished.
We can also supply you with our rod material in the form of billets in diameters of ≥ 65 mm. We will be pleased to provide you with further information on diameters and lengths on request.
Diameter: 9.5-305 mm (0.375-12 inches)
Length 2,130-10,060 mm (7-33 feet)
Delivery condition: forged, rolled, heat-treated, de-scaled or ground
Thickness: 7-67 mm (0.281-2.625 inches)
Width: 13-114 mm (0.5-4.5 inches)
1) VDM Metals USA produces alloys including the following: VDM® Alloy 25, VDM® Alloy 188, VDM® Alloy 600, VDM® Alloy 617, VDM® Alloy 625, VDM® Alloy 718, VDM® Alloy 722, VDM® Alloy 901, VDM® Alloy C-263, VDM® Alloy X, VDM® Alloy X-750, VDM® Alloy C-276, René 41 (Trademark of General Electric), Waspaloy (Trademark of United Technologies Corp.)
Bars and billets made by VDM Metals pass through especially stringent quality control. At a very early stage, we established quality assurance as the overriding principle and developed it into a quality management system with in-process checks and inspections. This is closely linked to our continuous improvement processes for optimising all operating procedures.
VDM Metals GmbH, Plettenberger Straße 2, 58791 Werdohl, Germany firstname.lastname@example.org